Peavey ReValver MK III - Page 21

Module name = M-998
Descripon = This simple power amp, uses 2 triodes in series for extra gain, and also uses a pair of
tonal character lters, that can be tweaked in the Tweak GUI.
Module name = Standard Power Amp #2
Descripon = This power amp has a standard push-pull end stage, but not driven by the usual
Long Tail Pair (LTP). It does have a “clean” switch for less drive and slightly dierent tonal char-
acter.
Module name = ‘62 BluesMaker power amp
Descripon = This power amp is taken directly out of the ‘62 BluesMaker. It has a drive and pres-
ence control, and has a standard Negave Feedback Loop (NFB) to which the presence control is
aached. The NFB shapes the distoron character of the power stage.
20