Peavey RQ 200

Gain:
Mic Input to Channel Insert Send:
Mic Input to Main Left/Right:
Mic Input to Monitor, Effects Send:
Line Input 1 and 2 to Main Left/Right:
Line Input 3 to 6 to Main Left/Right:
Variable +10 dB to +52 dB
72 dB
75 dB
52 dB
36 dB
Frequency Response:
Mic Input to Left Ñ Right Outputs:
Mic Input to Monitor Ñ Effects Outputs:
10 Hz to 30 kHz (+0, -1 dB)
10 Hz to 25 kHz (+0, -1 dB)
Total Harmonic Distortion (THD):
<0.01% Ñ 1 kHz, Mic Input to Left/Right outs @ nominal level (22 Hz to 22 kHz BW)
Hum and Noise:
EIN -128 dBu (Terminated 150 Ohms)
RQ
ª
200 SPECIFICATIONS:
Output S/N Ratio, dB Test Conditions
Ref. Nom. Out Level = 0 dBu
-97 All faders down
-82 Master fader nom./chan. fader/send down
Master L/R -80 All fader nom.: Min. gain
-62 All fader nom.: Max. gain
-102 Master down
Monitor and -80 Master nom./chan. down
Effects -76 Master/channel nom.: Min. gain
-58 Master/channel nom.: Max. gain
(Hum and Noise - with filter: 22 Hz ~ 22 kHz)
COMMON MODE REJECTION RATIO (C.M.R.R.):
Mic Input:
60 dB typical @ 1 kHz
Meters:
Five-segment peak-level meters (0 dB reading
corresponds to nominal output level: 0 dBu on the
unbalanced outputs, +6 dBu on the balanced outputs)
Phantom Power:
22 V typical with AC power
8 V with two - 9V batteries
17 V with 3
rd
phantom power battery
Dimensions (H x W x D):
3" x 13.875: x 10"
(7.6 cm x 35.2 cm x 25.4 cm)
POWER REQUIREMENTS:
AC Operation:
16.5 VAC, 1 amp 250 ma 4 watts
Provided from one of the following 16.5 VAC, 1 amp
power transformers:
100 VAC Primary - Peavey 70901112
120 VAC Primary - Peavey 70900660
230 VAC Primary - Peavey 70900862
Battery Operation:
¥ Two 9V Alkaline batteries for basic mixer operation with
8V Phantom power
¥ Three 9V Alkaline batteries for basic mixer operation
with 17V Phantom power
Weight:
5.5 pounds (2.5 kg)
10