Peavey RQ 200

9
RQ
ª
200 Mini Console
Specifications:
RQ
ª
200 Input Specifications:
Input Input Input Input Levels, dBu* Bal./ Connector
Imped. gain-pot Min.** Nominal Max.*** Unbal.
(Ohms) setting,
Min. dB
Microphone 2 k Max. Gain -72 -52 -34 Bal. XLR Pin:
Chan. 1-6 +52 dB -37 (bat.) Pin 1 (Ground)
Pin 2 (+)
Min. Gain -30 -10 +8 Pin 3 (-)
+10 dB +5 (bat.)
Line Input 20 k Max. Gain -52 -32 -14 Bal. 1/4" TRS:
Chan. 1 and 2 +32 dB -17 (bat.) Tip (+),
Ring (-)
Min Gain -10 +10 +30 Sleeve (Ground)
-10 dB
Stereo 8 k Max. Gain -36 -16 +2 Unbal. 1/4" TRS:
Line Input +16 dB -1 (bat.) Tip (+)
Chan. 3-5 Sleeve (Ground)
Nom. Gain -20 0 +18
0 dB +15 (bat.)
Stereo 8 k Max. Gain -36 -16 +2 RCA TS/
Line Input +16 dB -1 (bat.) Unbal. 3.5mm TRS:
Chan. 6 Tip (Left)
Nom. Gain -20 0 +18 Ring (Right)
0 dB +15 (bat.) Sleeve (Ground)
* 0 dBu = 0.775V (RMS)
** Minimum input level (Sensitivity) is the smallest signal that will produce nominal output with controls set for
maximum gain.
*** Maximum input signal that will cause clipping with controls set at nominal gain position
* 0 dBu = 0.775V (RMS)
(Bat.): Under battery power
Output Min. Load Output Level dBu* Bal./ Connector
Impedance Nom. Max. Unbal.
(Ohms)
0 +18 Unbal. 1/4" TRS:
Master L/R 600 +15 (bat.) Bal. TIP (Left)
Ring (Right)
+6 +24 Bal. Sleeve (Ground)
+21 (bat.)
600 0 +18 1/4" TS:
Monitor Send +15 (bat.) Unbal. Tip (+)
Sleeve (Ground)
600 0 +18 1/4" TS:
Effects Send -15 (bat.) Unbal. Tip (+)
Sleeve (Ground)
RQ
ª
200 Output Specifications: