Need help?Do you have a question about the Peavey RQ 4300 Series and is the answer not in the manual?
General| Brand | Peavey |
|---|---|
| Model | RQ 4300 Series |
| Category | Music Mixer |
| Language | English |
Alerts user to dangerous uninsulated voltage and advises against opening the enclosure for safety.
Warns against exposing the unit to rain or moisture and advises reading the operating guide.
Introduces the mixing console, highlighting its design, versatility, and key applications.
Lists the comprehensive features, including channel count, bus design, and special functions.
Defines essential audio terms like Buses, SUB groups, and AUX sends for user understanding.
Explains PFL, AFL, LOW CUT, INSERTS, COMPRESSORS, and PHANTOM POWER functions.
Details the pinout for XLR, TS, TRS, and RCA connectors used on the mixer.
Provides guidance on unpacking the unit and handling potential shipping damage.
Illustrates and describes the INSERT, LINE, and MIC inputs on standard channels.
Explains the GAIN control for input level and the LOW CUT filter for bass frequency reduction.
Details the HI and MID EQ controls for shaping high and mid-frequency responses.
Explains the MID FREQ and LOW EQ controls for detailed tone shaping.
Details AUX SENDs (pre/post-fader) and the PAN control for stereo placement.
Describes ASSIGN switches for bus routing and MUTE/CLIP and PFL/SIGNAL functions.
Details Super Channels, including PAD and POLARITY controls replacing INSERT jacks.
Explains Stereo Channels, their EQ exception, and independent input gain controls.
Describes the 1/4" and RCA line inputs for stereo signals on these channels.
Covers LEVEL, MUTE/CLIP LED, and AFL/SIGNAL LED for auxiliary send masters.
Details COMPRESSOR I/O, GAIN, LINK, GAIN REDUCTION LEDs, and THRESHOLD.
Explains SUB GROUP LEVEL LEDs, OUTPUT ASSIGN switches, MUTE/MUTE LED, and AFL/AFL LED.
Details the LEVEL control and MUTE/CLIP, AFL/SIGNAL LEDs for AUX SENDS.
Explains compressor function, I/O patching, GAIN makeup, and LINKing capabilities.
Describes GAIN REDUCTION LEDs and the THRESHOLD control for compressor operation.
Explains SUB GROUP LEVEL LEDs, OUTPUT ASSIGN switches, MUTE/MUTE LED, AFL/AFL LED, and SUB FADERS.
Covers the LOW CUT filter and LEVEL controls for AUX returns and external effects.
Details the ASSIGN, BAL/PAN, and LEVEL controls for return signals.
Explains PHANTOM POWER activation for mics and headphone output level control.
Describes LEFT/RIGHT and MONO LEVEL DISPLAYS and the MONO MASTER FADER.
Details L, R, MONO INSERT jacks and unbalanced/balanced main outputs.
Describes the 1/4" balanced RETURN INPUTS for effects or additional inputs.
Explains COMPRESSOR I/O, SUB OUT, and AUX OUT connectors for signal routing.
Details the REMOVABLE POWER CORD receptacle and the POWER SWITCH functionality.
Shows the block diagram for microphone and line inputs, including gain and EQ stages.
Depicts the block diagram for the master section, subgroups, and outputs.
Illustrates a typical setup for a three-speaker sound system configuration.
Demonstrates a common stereo speaker system connection example.
Details input impedance, gain settings, and input levels for microphone inputs.
Provides specifications for line, insert, and auxiliary return inputs.
Details nominal and maximum output levels for main L/R, Mono, Sub, and Aux sends.
Lists gain adjustment ranges and frequency response characteristics of the mixer.
Specifies the THD performance of the mixer across different inputs and frequencies.
Presents data on residual noise, S/N ratio, EIN, and crosstalk.
Details power requirements, dimensions, and weight of the RQ 4300 series mixers.
Outlines what the warranty covers, what it does not cover, and who it protects.
Specifies warranty lengths and the process for obtaining warranty service.
Discusses limitations on implied warranties and exclusions of damages.
Provides 16 numbered instructions for safe operation and maintenance of the apparatus.
Advises on protecting hearing from high sound levels and lists OSHA exposure limits.
To Next Page
