Peavey SANPERA I - Expression Pedal

®
SANPERA I
™
1
3 4
2 5 6
5. Main/AUX Indication LED
These LEDs indicate whether the pedal is in MAIN mode
or AUX MODE. Depress the toe area of the expression
pedal to switch between modes. The default setting of
the expression pedal is to control the volume of the am-
plier. The Main LED indicates that the expression pedal
is set to VOLUME, and AUX indicates WAH unless the
amplier is set to PITCH SHIFT.
6. Expression Pedal
The default mode of the expression pedal is set to control
the volume of the amplier. When set to AUX this pedal
controls a universal wah. To activate the wah, simply
depress the toe area of the footswitch. When Pitch Shift
is selected on the amplier, this pedal will control the
pitch of the signal.