Need help?Do you have a question about the Peavey SP 5G and is the answer not in the manual?
General| Impedance | 8 Ohms |
|---|---|
| Crossover Frequency | 1.8 kHz |
| Finish | Black carpet |
| Type | Two-way full-range loudspeaker |
| LF Driver | 15" woofer |
| HF Driver | 1.4" titanium diaphragm compression driver |
| Input Connections | 1/4" phone jack and Neutrik Speakon |
| Sensitivity | 98 dB |
| Enclosure Material | Carpet-covered trapezoidal |
| Grille | Powder-coated steel |
| Connectors | 1/4" phone jack and Neutrik Speakon |
Defines the speaker's frequency response, low frequency cut-off, and usable low frequency limit.
Details continuous, program, and peak power handling for full-range and bi-amp modes.
Specifies sound pressure levels (SPL) at 1 watt/1 meter and maximum SPL for different modes.
Details Peavey's proprietary circuit for high-frequency driver protection against overpowering.
Describes Peavey's power handling rating system, based on AES standards and simulated music signals.
Provides formal A&E specifications including bandwidth, sensitivity, impedance, power, dimensions, and weight.
To Next Page
