Need help?Do you have a question about the Peavey SP 5Ti and is the answer not in the manual?
General| Sensitivity | 98 dB |
|---|---|
| Maximum SPL | 129 dB |
| Nominal Impedance | 8 Ohms |
| Crossover Frequency | 1.8 kHz |
| Nominal Coverage | 90° x 50° |
| Enclosure Material | Plywood |
| Grille | Powder-coated steel |
| Type | 2-way |
| Woofer | 15 in |
| Tweeter | 1.4 in |
| HF Driver | 1.4" (35 mm) Titanium diaphragm |
| Finish | Black |
Defines the 3 dB and 10 dB frequency cut-off points for usable low frequency output.
Specifies continuous and program power handling capabilities, including RMS voltage.
Details sound pressure levels at 1 meter for 1 watt input and maximum output.
Describes polar response angles and directivity factors across frequency ranges.
Lists the woofer and compression driver, including horn details.
Specifies tuning frequency, crossover frequency, type, slope, and impedance.
Details enclosure materials, finish, mounting options, and dimensions.
Lists optional accessories and the net weight of the loudspeaker system.
Describes the SP 5Ti as a compact, 2-way sound reinforcement system for various applications.
Details the enclosure construction, materials, and the two-way system components.
Explains how directivity factors and beamwidth specifications relate to coverage.
Discusses the measurement of frequency response and its accuracy for the system.
Details Peavey's rating methods for power handling using specific test signals.
Summarizes key operational specs: bandwidth, output level, impedance, power handling, and geometry.
Provides the outside dimensions and total weight of the loudspeaker system.
Details the one-year limited warranty and how to obtain a statement.
To Next Page
