Need help?Do you have a question about the Peavey EUROSYS 10PM and is the answer not in the manual?
Connect line level signals from the mixer, enabling daisy-chaining to other units.
Controls the overall sound output level of the powered monitor enclosure.
Sliders for adjusting sound frequencies to combat feedback and shape tone.
Visual indicator that confirms AC mains power is connected to the amplifier.
Allows connection of an external unpowered monitor with an 8-ohm impedance.
Device used to switch the powered monitor enclosure between ON and OFF states.
Integrated IEC connector and fuse holder for the AC mains power connection.
Instructions for correctly wiring a mains plug to the power cord for safety.
Specifies the typical power delivery into different speaker impedances.
The input voltage required to achieve a specific power output level.
The recommended fuse rating for the unit to protect against overcurrent.
Total power consumption of the unit at rated output.
Specifies the required AC mains voltage and frequency for operation.
Safety warnings regarding exposure to elements and internal servicing.
To Next Page
General
