Need help?Do you have a question about the Peavey Vypyr VIP Series and is the answer not in the manual?
General| Amplifier Type | Modeling |
|---|---|
| Instrument Input | 1 x 1/4" |
| USB Interface | Yes |
| Power Output | 20W, 40W, or 100W (depending on model) |
| Speaker Size | Varies by model (VIP 2: 12", VIP 3: 12") |
| Effects | Yes, multiple effects including reverb, delay, modulation, etc. |
| Inputs | 1 x 1/4" (instrument) |
| Outputs | Headphone Out |
| Weight | Variable (varies by model) |
Warns about permanent hearing loss from high noise levels and advises wearing hearing protection.
Selects amp models and channels; includes tuner mode activation.
Enables alternate control functions for selected effects or stompboxes.
Provides a digital audio output for recording and firmware updates.
Selects amp models and channels; includes tuner mode.
Selects 'Rack' effects; press encoder momentarily to enter Edit mode.
Changes amp controls to alternate functions for editing effects or stompboxes.
Scrolls through and selects over 400 user-definable presets.
Selects amp models and channels; includes tuner and System Menu access.
Selects 'Rack' effects; press encoder momentarily to enter Edit mode.
Reduces amplifier output power from 100 Watts down to 1 Watt.
Step-by-step guide to saving edited presets and renaming them.
How to access the System Menu for options like DEMO MODE and FACTORY RESET.
Lists available instrument simulations and stompbox effects for VIP 1 and VIP 2.
Connects Sanpera foot controllers, providing power and MIDI data.
Receptacle for IEC line cord to provide AC power; grounding is essential.
Details rated power, load, power consumption, and dimensions/weight for VIP 1.
To Next Page
