PEDROLLO EVOLUTION Series User Manual

PEDROLLO S.p.A.
Via E. Fermi, 7 – 37047 San Bonifacio - (Verona) - Italy
Tel. +39 045 6136311 – Fax +39 045 7614663
e-mail: sales@pedrollo.com – www.pedrollo.com
MADE IN ITALY
EVOLUTION
QUADRO ELETTRICO PER UN MOTORE CON CONTROLLO DEL COSØ
CONTROL PANEL WITH COSØ CONTROL
IT ISTRUZIONI PER L’USO
EN OPERATING INSTRUCTIONS

PEDROLLO EVOLUTION Series Specifications

General

Series	EVOLUTION
Category	Control Panel
Frequency	50/60 Hz
Mounting	Wall mounting
Display	LCD
Protections	Overload, short circuit, phase failure
Compatibility	Submersible pumps

Summary

Symbols and Warnings

Warnings and Safety Precautions

Technical Characteristics

Installation Guide

Functions and Programming

Main Visualizations

Manual Mode Operation

Alarms and Troubleshooting

Dry Running Motor Alarm

Indicates low cos-fi value, triggers alarm output, auto-resets based on programming.

Motor Protected Alarm

Triggered by current exceeding programmed value, requires OK button press for reset.

Voltage Too Low Alarm

Detected low voltage triggers alarm output, requires manual reset via OK button.

Voltage Too High Alarm

Detected high voltage triggers alarm output, requires manual reset via OK button.

Phase Sequence or Missing Phase Alarm