9 of 27
ISSUED: 05-18-05 SHEET #: 095-9234-4 08-23-05
If more or less tension is desired in the arm pivot points, do the following:
• To increase tension, turn tension screw(s) clockwise with 3/16" allen wrench (D).
• To reduce tension, turn tension screw(s) counter-clockwise with allen wrench. Do not turn more than half a turn.
5
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
TENSION SCREWS
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the
screen to fall.
WARNING
To Next Page
Loading...
