- 21 -
2.4 Lap belt (2-point) with a locking latch
plate. This type of belt can be adjusted by
pulling/releasing the strap tail at the latch
plate.
Some vehicles may have seatbelts with
large rigid buckles. These designs may cause
the installation to be troublesome and aect
stability of the child restraint during
normal use. Also, it may cause slack in the
belt that may result in poor performance
in case of a sudden stop or crash.
In this situation, try another seating position
in the vehicle or consult your vehicle owner’s
manual.
If additional help is needed call Customer
Service
@ 1-800-661-5050.
4
Installing your child restraint in the vehicle
To Next Page
Loading...
