User’s manual
13
EN
• Press once to locate the vehicle - the directional
lights gleam 15 times and the siren chips
15 times continuously
REMOTE CONTROL PROGRAMMING
1. Press the learning button on the control unit,
the turn lights will ash once.
2. Press any key on the remote control.
3. The car will emit two sound signals and turn
lights will ash once; which means learning has
been performed successfully.
4. User can program up to 4 remote controls with
the same control unit.
SPECIFICATION
• Central lock system automation
• Car localization
• Trunk release
• Window closing
• Electronic or pneumatic lock
• Pneumatic lock dedicated for bigger vehicles (e.g.
buses)
• Operation range: up to 50 m
• Power supply: DC 12 V
• Set includes: control unit, 2 remote controls, cables
To Next Page
