To Next PageTo Next PageWhat to do if my Pelgrim IDK584 is not working and the display is blank?
If your Pelgrim Hob isn't working and the display is blank, it's likely due to a power supply issue. Check your fuses or the electric switch to ensure they are functioning correctly.
Why is the display flashing on my Pelgrim IDK584 Hob when I turn on a cooking zone?
If the display flashes after you switch on a cooking zone on your Pelgrim Hob, it means the pan you're using isn't suitable for induction cooking or its diameter is less than 12 cm. Try using a pan that is suitable.
What to do if my Pelgrim IDK584 simply switches off?
If your Pelgrim Hob suddenly switches off, it's possible you accidentally touched the On/Off button. Simply switch the hob back on to resume cooking.
Why does my Pelgrim IDK584 switch off during use and display 4 dashes?
If your Pelgrim Hob switches off during use and displays four dashes, it indicates that something has boiled over or there's an object on the operating panel. Clean the hob or remove the object, and then you can continue cooking.
Why does a fuse blow as soon as my Pelgrim IDK584 is switched on?
If a fuse blows as soon as you switch on your Pelgrim Hob, the hob has been wrongly connected. Check the electrical connections.
What does it mean if my Pelgrim IDK584 doesn't work and shows fault code F1, F2, F3 or F4?
If your Pelgrim Hob doesn't work and shows a fault code F1, F2, F3, or F4, it suggests that the electrical circuit works poorly. Contact the service department.
What does error code F0 mean on my Pelgrim IDK584 Hob?
If your Pelgrim Hob displays error code F0, it means that the pan is boiled dry or too hot. Let the appliance cool down or continue cooking on a lower setting.
Why does my Pelgrim IDK584 Hob only work on one side?
If your Pelgrim Hob only works on one side, the hob has been wrongly connected. Check the electrical connections.
What does error code F5 or F6 mean on my Pelgrim IDK584?
If your Pelgrim Hob displays error code F5 or F6, it means the appliance overheated due to insufficient ventilation. Check the building-in situation or contact the Service Department.
Why is my Pelgrim Hob making a continuous beep?
If your Pelgrim Hob is emitting a continuous beep, the hob has been wrongly connected. Check the electrical connections.
Overview of the induction hob's features and benefits.
Detailed explanation of the appliance's control buttons and indicators.
Details the cooking zones, their sizes, and power ratings for specific models.
Covers general warnings for connection, repair, and during use.
Important safety notes and precautions to observe during appliance operation.
Covers risks like heat, fires, fragile surfaces, and unauthorized use.
Explains how sensors monitor temperature to prevent overheating.
Details the automatic shut-off function based on cooking duration settings.
Describes the function that prevents boiling over and its causes.
Explains how the appliance prevents overheating and how to avoid it.
Instructions on how to operate the touch-sensitive controls effectively.
Explains the magnetic field principle and heat generation in the pan.
Specifies the required quality and characteristics of pans for induction hobs.
Covers checking pan compatibility, minimum size requirements, and special cookware.
Step-by-step guide to switching on, off, and setting power levels.
Explains the indicator for hot cooking zones after use.
Details the high-power boost setting for rapid heating.
Explains power adjustment ranges and how front/back zones interact.
How to set the timer to automatically switch off a cooking zone.
How to activate and use the child lock to prevent unintended operation.
Explains child lock activation/deactivation and its use for cleaning.
How to enable or disable the beep signal for button presses.
Guidance on selecting oils based on their smoke points for healthy frying.
Recommends specific power settings for various cooking tasks.
Details recommended settings for intermediate and low-temperature cooking tasks.
Provides instructions for daily cleaning, stubborn stains, and things to avoid.
Covers handling glass cracks and general problem-solving steps.
Addresses common symptoms and provides practical solutions for appliance problems.
Details solutions for electrical issues, fault codes, and appliance lock status.
Key safety guidelines and required clearances for proper installation.
Specifies the precise dimensions and cut-out requirements for fitting the hob.
Details the necessary ventilation for cooling and proper operation.
Wiring diagrams and instructions for a 2-phase electrical connection.
Wiring diagrams for multi-phase connections, with safety warnings.
Wiring diagrams for 3-phase connections, specifying wire configurations.
Detailed instructions for physically installing the hob into the kitchen unit.
Comprehensive technical data including dimensions, power, and connection types.
Guidance on responsible disposal of packaging materials and the appliance.
General
