What to do if my Pelgrim Hob shows fault code E2?
If the Pelgrim Hob displays fault code E2, it means the hob has overheated or the pan you are using is not suitable. Allow the hob to cool down or use a suitable pan.
Why is my Pelgrim IDK862ONY Hob not working and nothing is on the display?
If your Pelgrim Hob is not working and nothing appears on the display, it indicates there is no power supply due to a defective cable or a faulty connection. Check the fuses or the electric switch (if there is no plug).
Why does my Pelgrim IDK862ONY simply switch off?
If the Pelgrim Hob simply switches off, it may be because you accidentally touched the On/Off button. Switch the hob back on.
What does fault code ER22 mean on my Pelgrim IDK862ONY?
If the Pelgrim Hob displays fault code ER22, it means the control panel is dirty or has water on it. Clean the control panel.
What to do if a fuse blows when I switch on my Pelgrim Hob?
If a fuse blows as soon as the Pelgrim Hob is switched on, the hob has been wrongly connected. Check the electrical connections.
Why does the display keep flashing on my Pelgrim IDK862ONY Hob?
If the display keeps flashing after you switch on a cooking zone on your Pelgrim Hob, the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
What does fault code U400 mean on my Pelgrim IDK862ONY?
If the Pelgrim Hob displays fault code U400, it indicates that the voltage is too high and/ or the hob is not properly connected. Have your connection changed.
General| Type | Induction |
|---|---|
| Number of Cooking Zones | 4 |
| Width | 59 cm |
| Control Type | Touch |
| Power Levels | 9 |
| Colour | Black |
| Safety Features | Child lock, Overheat protection |
To Next Page
