EN 15
Switching on the appliance
Push and hold the On/Off button for 5 seconds to switch on the appliance.
The temperature is set to ‘2 °C’; the corresponding indicator light comes on.
Attention; each time the appliance is switched on again, it takes a while to reach the
correct temperature.
Setting the temperature
Push the On/Off button (several times) to choose a temperature.
The corresponding indicator light comes on.
• The temperature of the refrigerator compartment can be set to between +2 °C and +8 °C.
• The recommended temperature of the refrigerator compartment is 4 °C.
Intensive cooling
This appliance has an intensive cooling function. This function decreases the temperature in the
appliance as quickly as possible. This is ideal for cooling products that have just been put into
the refrigerator. Use this function when you put a large quantity of food in the appliance.
When the intensive cooling function is selected, the appliance works at maximum
capacity. It may then make more noise for a while.
Switch on the intensive cooling function
Push (several times) the function button until the corresponding indicator light comes on.
The intensive cooling function is switched on.
Switch off the intensive cooling function
Push (several times) the function button until the corresponding indicator light goes off.
The intensive cooling function is switched off.
When the intensive cooling function is not switched off manually, the function will be
switched off automatically after about five hours.
OPERATING THE APPLIANCE
To Next Page
Loading...
