this thermostat is going to be wired to.
master power.
Replacing an existing wired thermostat
Remove the cover from the old
thermostat and either take a picture
or label the wires as a guide for wiring
the new Pelican thermostat.
Uninstall the old thermostat and set
aside.
Installing a Pelican thermostat in a new location
This Pelican thermostat is designed to
vertical 1-gang electrical box.
Choose a mounting location where
the thermostat:
is at least 48" to 60"
is on an interior wall.
where it can detect the temperature
of the room it will be maintaining.
and is away from sun exposure or
ON
OFF
2
To Next Page
Loading...
