Pelican TC2 User Manual

!
Before you start
Review all instructions before starting to avoid discovering or creating any
issues during installation. This thermostat is designed to be installed on 24
VAC systems only.
This thermostat is designed to be installed by a licensed professional.
A Pelican Gateway must be used with this thermostat. The thermostat cannot
be configured or managed without the gateway. We recommend installing
the gateway prior to installing this product.
Installation location
NEVER INSTALL IN AN ENCLOSED METAL BOX OR ON A METAL SURFACE.
Install in a location where it can communicate with the Pelican wireless mesh
network.
Install 48" to 60" from the floor in the room where it will be maintaining the
temperature.
Install on an interior wall away from doors, filing cabinets, electrical
equipment, or other metal objects.
Commercial Connected Thermostat
with Humidity
Installation Guide
PELICAN
Model: TC2

Pelican TC2 Specifications

General

Brand	Pelican
Model	TC2
Category	Thermostat
Language	English

Summary

Before You Start

Installation Location

Guidelines for selecting an appropriate location for thermostat installation, emphasizing wireless communication and temperature sensing.

Power Management

Turn Off Power

Instructions to turn off power at the circuit breaker or master power before wiring.

Replacing an Existing Wired Thermostat

Steps for removing an old thermostat and preparing for the new Pelican thermostat installation.

Installing a Pelican Thermostat in a New Location

Guidance on choosing a mounting location for a new thermostat installation, considering height and wall placement.

Install the Thermostat Back Plate

Electrical Box Installation

Instructions for mounting the thermostat back plate to a vertical electrical box.

Wall Installation

Instructions for drilling holes and installing drywall anchors for wall mounting the thermostat back plate.

Connect Wires to Thermostat

Guidance on connecting thermostat wires, referring to wiring guides for different systems.

Limited Wires? No Common Wire?

Reference to pages for instructions on handling installations with limited wiring or no common wire.

Limited Wire Installation

Step 1: Remove the Wiring Module

Procedure for detaching the wiring module from the thermostat's back plate by loosening terminals.

Step 2: Install the Wiring Module

Instructions for installing the wiring module in the HVAC equipment's control board.

Step 3: Connect Wiring Module to Thermostat

Attach the Display

Optional: Tamper Resistant Lock

Details on engaging and disengaging the thermostat's internal locking mechanism for security.

Conventional Heating and Cooling Systems

Conventional Heating and Cooling Systems (2 Speed Fan)

Heat Pump Systems

Heat Pump Systems (2 Speed Fan, Aux/Emergency Heat)

Two-Pipe Fan Coils

Two-Pipe Fan Coils (2 Speed Fan)

Four-Pipe Fan Coils

Four-Pipe Fan Coils (2 Speed Fan)

Humidity Control

Notes and Troubleshooting

Notes

Important notes regarding wiring, relays, wire gauge, and actuator types for thermostat installation.

Troubleshooting

Steps to diagnose and resolve issues with thermostat power, connectivity, and app recognition.

Thermostat Info Page

Serial Number

Unique identifier for the thermostat, used for configuration and naming in the Pelican App.

Thermostat Name

Custom identifier for the thermostat, set via the Pelican App.

Configuration

Displays current system configuration (Conventional/Heat Pump) and allows changes.

Humidity Setting

Shows and allows adjustment of the humidity set-point if humidity control is enabled.

Model Number

The specific model number of the thermostat.

Alarm Notifications

Identifies icons and issues detected, directing users to the troubleshooting guide.

Thermostat Conventional/Heat Pump Configuration Page

Accessing Configuration Page

Procedure to navigate to and change the thermostat's control configuration settings.