Need help?Do you have a question about the Pella architect series and is the answer not in the manual?
General| Glass Options | Obscure, Decorative |
|---|---|
| Energy Efficiency | Low-E Glass, Insulated Frames |
| Customization | Custom sizes |
| Product Type | Entry Doors, Patio Doors |
| Hardware Finishes | Oil-Rubbed Bronze |
| Security Features | Multi-Point Locking Systems, Impact-Resistant Glass |
| Warranty | Limited warranty; specific terms vary by component and application. Refer to Pella's written warranty for details. |
| Hardware | handles, hinges |
| Color Options | Wide range of colors and finishes |
Identifies and explains key components like frame, hinges, locks, sweeps, and weatherstripping.
Details the Pella Unit ID, steel deadbolt reinforcement plate, and multipoint locking system.
How to engage, disengage, and use the multipoint lock features for security.
Instructions for operating the integrated blinds between door glass panes.
Methods for cleaning glass, door panels, and exterior cladding.
Guidance on cleaning and maintaining door hardware finishes.
Importance of finishing, warranty, and differences between fiberglass and steel doors.
Steps and considerations before applying finishes to the door.
Key questions to ask and essential tips for successful door finishing.
Procedures for testing stain color and applying it to the door panel.
Detailed steps for applying gel stain and feathering for a natural look.
Instructions for applying a protective topcoat over stained fiberglass surfaces.
Advice on choosing paint with good blocking resistance and application steps.
Specific painting instructions for fiberglass and steel door materials.
How to finish various types of door frames, including wood and aluminum-clad.
Methods for performing touch-ups and repairs on stained or painted finishes.
Annual checks and maintenance for interior and exterior door surfaces.
Specific maintenance advice for coastal areas exposed to salt spray.
Procedures for glass damage and resolving operational difficulties.
Steps for adjusting door hinges and ensuring frame squareness.
Addressing water/air leaks from weatherstrips, seals, or frame issues.
Understanding condensation and its causes in homes.
Methods for determining and reducing indoor humidity levels.
Practical advice for managing moisture during colder months.
Details on Pella Unit ID, EIFS, and storm door compatibility.
Understanding the National Fenestration Rating Council (NFRC) label.
To Next Page
