Rev. 10/17/2016
© 2016 Pella Corporation
Page 1 of 8
Part Number: 81XJ0000
These instructions apply to:
Rolscreen Retractable Screen 2/2017-Current
1
Rolscreen Cartridge Removal:
A. With the screen fully raised; Remove the screen guide attachment screws. Number of screws will vary
depending on window height.
B. Grasp the guide and pull it toward the center of the
window and then down to remove.
Repeat 1A-1B on other guide.
Operating a retractable screen may result in a static discharge. A static discharge in the
presence of a flammable substance such as aerosol lubricant could cause ignition. To avoid
injury and/or property damage, do not use any flammable substance on a retractable screen
.
CAUTION
1A 1A
1B 1B
Tools Required:
• Flat blade screwdriver
• Drill/driver with #1 square drive bit
Rolscreen® Retractable Screen Cartridge Dis-Assembly
and Assembly
Service Instruction
To Next Page
Need help?
General
