pellenc FIXION 2 - Page 7

7
7
USER GUIDE Fixion 2
29_133084_B
■ SAFETY INSTRUCTIONS
USING BATTERY-OPERATED TOOLS AND SAFETY PRECAUTIONS.
a) Recharge only with the charger specied by the manufacturer. A charger suitable for a specic battery pack
may create a re hazard when used with another type of battery pack.
b) Only use the tools with specically designated battery packs. Use of any other battery pack may create
a risk of injury and re.
c) When a battery pack is not being used, store it away from metal objects such as paper clips, coins,
keys, nails, screws and other small items that can create a connection between the terminals. A short-circuit
between the battery terminals may cause burns or re.
d) If in bad condition, a liquid may be ejected from the battery; avoid all contact. In the event of accidental
contact, clean with water. If the liquid gets into your eyes, seek medical help. The liquid ejected from the
batteries can cause irritation and burns.
e) Do not use a battery pack or battery-operated tool that is damaged or modied. Damaged or modied
batteries can have unpredictable behaviour causing re, explosion or risk of injury.
f) Do not expose a battery pack or battery-operated tool to re or excessive temperatures. Exposure to re
or a temperature above 130° C (265° F) may cause an explosion.
g) Follow all charging instructions and do not charge the battery pack or battery-powered tool outside
the temperature range specied in the instructions. Incorrect charging or charging at temperatures outside the
specied temperature range may damage the battery and increase the risk of re.
MAINTENANCE
a) Have the power tool serviced by a qualied technician, using only identical spare parts. This ensures the
continued safety of the power tool.
b) Never carry out maintenance work on damaged battery packs. Batteries should only be serviced by the
manufacturer or authorised service providers.
END OF LIFE MANAGEMENT OF THE TOOL
a) When the tool reaches the end of its useful life, PELLENC provides an information sheet for equipment end
of life. This information sheet provides instructions for the safe withdrawal of the components from service.