PELLENC POWER TOOL BATTERY OLIVION +
56_131087-H
4. Connect the charging cord (7) to the battery's charg-
ing connector (4).
56_20_012
5. When the gauge display (6) flashes, the battery is
charging.
Note
Charging is complete when the message 99 ap-
pears steadily on the gauge display (6).
56_20_013
Once the battery is charged,
1. disconnect the charging lead on the battery first (7),
2. disconnect the charger power connector (10).
Note
After a long storage period (new battery, winter
storage etc.), when you disconnect the charger, the
charge level indicator (6) may display a value of
less than 99%. This is a normal phenomenon which
can reoccur for up to 5 charge cycles with normal
use between each charge.
56_20_014
16
To Next Page
Loading...
