PELLET PRO 2300 User Manual

Pellet Pro® Vertical Pellet Smoker
Installation Manual
1) Remove all parts from the inside of the smoker and remove all cellophane.
2) Flip the smoker on its back side and attach the four casters to the bottom
corners of the smoker using the smaller bolts provided. It is optional to
attach the swiveling casters on the left or right side.
3) Once the casters are attached to the bottom of the smoker, flip the
smoker upright.
4) Insert the hopper assembly to the side of the cabinet and connect the
(4) corresponding color-coded Molex connectors. Then, connect the
ground wire to the bottom of the cabinet. See pictures below.

PELLET PRO 2300 Specifications

General

Brand	PELLET PRO
Model	2300
Category	Smokers
Language	English

Summary

Initial Smoker Preparation and Base Assembly

Unpacking and Cellophane Removal

Remove all parts and cellophane from inside the smoker before starting assembly.

Caster Installation and Hopper Connection

Attach the four casters to the smoker base and connect the hopper assembly.

Main Component Installation and Wiring

Securing Hopper and PID Controller

Secure the hopper assembly and attach the PID controller mounting piece to the cabinet.

Electrical Connections and Gauge Attachment

Connect Molex connectors, RTD probes, and attach temperature gauges to the door.

Internal Fitments and Final Assembly

Handle Attachment and Internal Guards

Attach door and side handles, install heat diffuser, drip pan, and hopper safety guard.

Vent, Dampener, and Rack Installation

Attach the side vent and dampener, then install all four stainless steel racks.

Circulation Fan and Seasoning Recommendation

Circulation Fan Installation

Mount the circulation fan to the top corner of the cabinet and secure it.

Seasoning and Grease Fire Prevention

Wipe down interior with oil for seasoning and use a pan to catch drippings.