Pelpro PP60 - Quick Start Guide

PP60 TROUBLE SHOOTING MANUAL
8-5-2013
CONVECTION BLOWER TROUBLE-SHOOTING
CLEAN THE CONVECTION BLOWER
AND MAKE SURE IT SPINS FREELY
MAKE SURE THE
EXHAUST
TEMPERATURE
PROBE IS
POSITIONED
CORRECTLY.
UNPLUG THE
STOVE, INSTALL
WIRES BACK ON
THE BLOWER
AND RESTART
THE UNIT.
SYSTEM IS
REPAIRED
ARE THE
WIRES
PLUGGED
INTO THE
BLOWER?
YES
NO
MAKE THE REPAIR BY
CLEANING OR
REPLACING THE
BLOWER OR BY
REPLACING THE
CONTROL BOARD.
WITH THE STOVE
WARMED UP, IS
THE BLOWER
RUNNING?
HOME
HOME
PAGE 2
YES
NO