What to do if my Pelpro Pellet stove fire starts but goes out?
If the fire starts in your Pelpro Pellet stove but then goes out, begin by confirming the firebox is clean and clear and ensure the firepot holes are clear. Inspect the stove body and confirm the exhaust probe is connected. Inspect and clean the exhaust outlet, and confirm the exhaust path is clean.
What to do if a component (i.e. blower) fails to start or fails to turn off in my Pelpro Pellet stove?
If a component, like a blower, fails to start or fails to turn off in your Pelpro Pellet stove, first check that all connections and power plugs are secure. Next, visually inspect the wires, blowers, and power cord to check for a short circuit.
What does Error Number 5 mean on my Pelpro Pellet stove?
Error Number 5 on your Pelpro Pellet stove indicates that the digital display is not communicating correctly with the stove control board. Inspect the cable for breaks or cuts and check the connection between the digital control and the control board. If that doesn't work, replace the component.
To Next Page
General