Pelpro TSC90 User Manual (English)

Other manuals for Pelpro TSC90

User Manual32 pages

Service Manual46 pages

Questions and Answers:

M
Mr. Edward Johnson DVMAug 20, 2025
What to do if my Pelpro Pellet stove will not light?
- P
  Paula DiazAug 20, 2025
  If your Pelpro Pellet stove won't light, you can try the following: * Ensure the firepot holes are clean. * Verify the igniter is getting hot (glowing orange). * Inspect the stove body. * Make sure there is fuel in the hopper and the lid is securely closed. * Check that the vacuum switch is clear and connected. * Confirm all exhaust blower connections are secure. * Ensure the feed assembly and motor are free of debris. * Confirm the exhaust path is clean.
N
Nicole GreerAug 22, 2025
What to do if pellets remain in the hopper of my Pelpro TSC90 Stove?
- Y
  Yolanda DavisAug 22, 2025
  If pellets remain in the hopper, empty any pellets and vacuum any remaining pellets or debris from the hopper.
S
Sabrina FergusonAug 25, 2025
What to do if there is debris in the convection blower of my Pelpro Stove?
- J
  Jeffrey BellAug 25, 2025
  If you find debris in the convection blower of your Pelpro Stove, remove the right side panel to access and remove the convection blower. Then, vacuum any debris from the fan blades and blower housing.
A
amymarshallAug 28, 2025
What does Error Number 7 mean on my Pelpro Pellet stove?
- G
  gnormanAug 28, 2025
  Error Number 7 on your Pelpro Pellet stove can be caused by several factors: * The feed motor may be locked on. * Non-approved fuel might be in use. * The exhaust temperature might have exceeded the allowable temperature. * There may be an issue with the convection blower. * The unit might be dirty. * There could be a failure of some component. * The installation configuration might be too tight, limiting air circulation. Solutions include replacing the control board if the feed motor does not turn off, reviewing the fuel being used, cleaning the unit, replacing components, and reviewing/moving the installation if necessary to improve air circulation.
B
Brian CamposAug 29, 2025
What does Error Number 4 mean on my Pelpro Pellet stove?
- P
  Parker BernardAug 29, 2025
  Error Number 4 on your Pelpro Pellet stove, indicates a missed ignition. This can happen due to: * Lack of fuel (hopper empty). * A jam in the feed. * The feed not turning. * A disconnected or failed feed motor. * A dirty firepot. * Issues with the igniter (no power or failed). * Debris in the igniter chamber. To resolve this, fill the hopper, inspect and clear any jams in the feed tube, inspect the feed motor circuit, clean the firepot, check the igniter leads, and clean any debris from the igniter chamber.
D
Doris MillerAug 31, 2025
What does Error Number 2 mean on my Pelpro Pellet stove?
- T
  trojasAug 31, 2025
  Error Number 2 on your Pelpro Pellet stove indicates that the exhaust temperature is either above or below the acceptable range, or there is an exhaust probe failure. It could also mean the probe is not plugged in. To solve this, try plugging the probe into the board. If that doesn't work, you may need to replace the component.
D
david33Sep 2, 2025
What does Error Number 3 mean on my Pelpro Pellet stove?
- A
  ajohnsonSep 2, 2025
  Error Number 3 on your Pelpro Pellet stove indicates that the ambient temperature is either above or below the acceptable range, or there is an ambient probe failure. It could also mean the probe is not plugged in. To solve this, try plugging the probe into the board. If that doesn't work, you may need to replace the component.
A
Alexander MorrisSep 4, 2025
What to do if my Pelpro Pellet stove starts and stops frequently in automatic mode?
- P
  Peter RobinsonSep 4, 2025
  If your Pelpro Pellet stove starts and stops frequently in automatic mode, first determine if varying room temperatures are the cause due to doors or windows being opened and closed repeatedly. If so, correct the issue. You may also want to examine the stove body and inspect the ambient probe, ensuring at least 2” is exposed outside of the stove body.
K
Kyle PhillipsSep 6, 2025
What to do if my Pelpro Pellet stove has a slow or smoky start-up and/or lazy flame?
- G
  Glenda PalmerSep 6, 2025
  If your Pelpro Pellet stove has a slow or smoky start-up or a lazy flame, you should first confirm the exhaust path is clean and clear. Clean your firepot and behind your baffles inside your firebox. You can also examine the stove body. Ensure the igniter is properly placed and centered. It's also a good idea to review the fuel quality.
J
John SandersSep 8, 2025
What to do if my Pelpro Pellet stove is plugged in but has no response?
- C
  Cindy ChandlerSep 8, 2025
  If your Pelpro Pellet stove is plugged in but shows no response, check your home’s circuit breaker. Also, reset the snap disc located between the drop tube and hopper. Visually inspect wires, blowers, and the power cord for any breaks or wear that could be causing a short circuit.