Pendulum CNT-90 Series Manual

2 brackets, (short, left; long, right)
4 screws, M5 x 8
4 screws, M6 x 8
WARNING: Do not perform any internal service or adjustment of this
instrument unless you are qualified to do so. Before you remove the cover,
disconnect mains cord and wait for one minute. Capacitors inside the
instrument can hold their charge even if the instrument has been separated
from all voltage sources.
Fig. 1-4 Fitting the rack mount brackets on the counter.
2.3.3.7. Assembling the Rackmount Kit (Option 22/05)
10 / 50

Pendulum CNT-90 Series Specifications

General

Brand	Pendulum
Model	CNT-90 Series
Category	Measuring Instruments
Language	English