EasyManuals Logo

Pendulum CNT-90 Series Manual

Pendulum CNT-90 Series
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
voltage decreases from 350 V
p
to 12V
rms
when you switch the input impedance from 1 MΩ to 50 Ω.
2.2.2.3. If in Doubt about Safety
Whenever you suspect that it is unsafe to use the instrument, you must make it inoperative by doing the following:
Disconnect the line cord
Clearly mark the instrument to prevent its further operation
Fig. 1‑1 Do not overlook the safety instructions!
Inform your Pendulum Instruments representative.
For example, the instrument is likely to be unsafe if it is visibly damaged.
2.2.2.4. Disposal of Hazardous Materials
CNT-90 & CNT-90XL only
If your instrument was ordered with a built-in battery supply (Option 23/90), it contains 12 Li-Ion cells arranged as a fixed
battery pack with internal protection circuitry.
Even though this type of cell does not cause environmental damage in the same way as NiCd, for instance, you should
dispose of a worn-out battery pack at an authorized recycling station or return it to Spectracom.
Individual cells cannot be replaced.
2.3. Unpacking
Check that the shipment is complete and that no damage has occurred during transportation. If the contents are
incomplete or damaged, file a claim with the carrier immediately. Also notify your local Spectracom sales or service
organization in case repair or replacement may be required.
6 / 50

Other manuals for Pendulum CNT-90 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pendulum CNT-90 Series and is the answer not in the manual?

Pendulum CNT-90 Series Specifications

General IconGeneral
BrandPendulum
ModelCNT-90 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals