Penguin Computing Relion 2940 - Replacing the Motherboard Tray

Hardware Installation - 18 -
Relion 2940 Chassis Manual
2-3 Replacing the Motherboard Tray
Follow these instructions to replace the motherboard tray:
1. Disconnect the power, SATA, front panel, and mainboard cable connectors.
2. Press the retaining clip on the left side of the tray along the direction of the arrow.
3. At the same time, pull out the tray by using its handle.Pull up the tray handle and slide of the
motherboard tray along the direction of the arrow.
1
2
3