Need help?Do you have a question about the Penguin Computing Relion 2908GT and is the answer not in the manual?
General safety and operating instructions for the system.
Steps and precautions before installing hardware components.
Detailed specifications of the system's hardware components.
Detailed instructions for installing the CPU into the socket.
Guide to applying thermal compound and installing CPU heat sinks.
Procedure for installing DDR4 memory modules.
Steps to install PCI expansion cards, including GPU cards.
Instructions for installing 2.5-inch hard disk drives into the chassis.
Configuration options for various hardware components.
Settings for boot device priority and configuration.
General safety and operating instructions for the system.
Steps and precautions before installing hardware components.
Detailed specifications of the system's hardware components.
Detailed instructions for installing the CPU into the socket.
Guide to applying thermal compound and installing CPU heat sinks.
Procedure for installing DDR4 memory modules.
Steps to install PCI expansion cards, including GPU cards.
Instructions for installing 2.5-inch hard disk drives into the chassis.
Configuration options for various hardware components.
Settings for boot device priority and configuration.
General| Product Name | Relion 2908GT |
|---|---|
| Manufacturer | Penguin Computing |
| Category | Server |
| Form Factor | 2U Rackmount |
| Maximum Processors | 2 |
| Memory Type | DDR4 |
| Operating System Support | Linux, Windows Server |
| Memory Speed | Up to 2933 MHz |
| Storage Controller | SATA/SAS |
| Networking | 10 Gigabit Ethernet |
| Power Supply | Redundant 1600W |
| Management | IPMI 2.0 |
| GPU Support | Up to 4 GPUs |
| Drive Bays | 8 x 3.5" hot-swap bays |
| Network Interface | Dual-port Gigabit Ethernet |
To Next Page
