Penguin Computing Relion 2908GT - Front Panel LED and Buttons

- 40 - Hardware Installation
Relion 2908GT Chassis Manual
3-3 Front Panel LED and Buttons
1
2
3
4
5
6
7
No. Name Color Status Description
Power button
1.
and LED
Green Solid On System is powered on.
Green Blink System is in ACPI S1 state (sleep mode)
• System is not powered on or in ACPI
S5
state (power off)
N/A Off
• System is in ACPI S4 state (hibernate
mode)
2.
ID Button
and LED
Blue Solid On System identification is active.
N/A Off System identification is disabled.
3.
LAN1
Activity LED
Green
Solid On Link between system and network
Green Blink Network access
N/A Off Disconnect/Idle
4.
LAN2
Activity LED
Green
Solid On Link between system and network
Green Blink Network access
N/A Off Disconnect/Idle
5.
HDD
Activity LED
Green Solid On HDD access
Green/ Blink
AMber Alternately
HDD rebuilding
Green Solid On HDD access
6.
System
Status LED
Green Solid On Running or normal operation
Amber Solid On There is at least one sensor that has critical alter.
N/A Off System is not ready.
7. Reset Button Press the button to reset the system.