Chapter 2 Start to Use
2-3
[Write2Go] uses the latest Boogie Board™ LCD eWriter technology,
the real time display will shows your writing on the panel.
The Blue LED will ash when you clean the writing on the writing
pad and the panel will ash at same time, the cleaning process is about 1.5
second, please write after the cleaning process nish.
The Way to Change Battery
1. Loosen the screws of the battery cover at the back side, and open the
battery cover to remove the old battery.
2. Put the new battery in, and then cover the battery cover and tighten the
screw to nish.
To Next Page
Loading...