Pentair Pool Products PG2000 840242 User Manual

Rev. C 7-29-05 1 P/N 840259
Installation Manual
Pentair Water Pool and Spa, Inc.
1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000
10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400
Visit us on the Internet at: www.pentairpool.com or www.staritepool.com
PG2000
®
Model No.s
840240
840241
840242
U.S. Patent Numbers
5,802,227; 5,825,954; 5,680,496;
6,002,216

Pentair Pool Products PG2000 840242 Specifications

General

Brand	Pentair Pool Products
Model	PG2000 840242
Category	Lighting Equipment
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Read and Follow All Instructions

Directive to carefully read and adhere to all provided installation and usage instructions.

Electrical Shock Hazard Warning

Critical warning detailing risks of electrical shock and electrocution during installation and operation.

FIBERworks Product Handling Warning

Cautionary note on proper handling of FIBERworks products to prevent injury or damage.

Authorized Installer Recommendation

Advisory recommending installation by trained and certified FIBERworks dealers for optimal safety and performance.

SECTION I. Before You Begin Installation

Installer's Ten Laws of FIBERworks

Fundamental principles for installers to ensure proper and safe installation of FIBERworks systems.

Designer/Salesperson's Ten Laws of FIBERworks

Key principles for pool designers and salespersons regarding effective sale and implementation of FIBERworks systems.

SECTION II. Running Conduit

SECTION V. Feeding or Pulling the AmerGlow Cable

Tips, Tricks, and Traps

Pulling or Feeding Cable

SECTION VI. AmerGlow Lens Assembly

Preparing the Cable

Steps for preparing the AmerGlow cable, including stripping the jacket and handling the fibers.

Installing Lenses

Procedure for installing the lenses into the assembly, including gel application for Standard Lenses.

SECTION VII. Installing the Ferrule Assembly

Preparing and Installing the Cable

Loading the Fiber into the Ferrule

Process for loading and arranging the fiber bundle into the ferrule for secure termination.

Cutting the Fiber

Final steps for cutting the fiber bundle after ferrule assembly, ensuring a clean and precise cut.

SECTION VIII. Installing the PG2000

Connecting the Ferrule Bundle

Mounting the PG2000

Wiring the PG2000

Guidelines for wiring the PG2000 unit, including safety warnings and electrical considerations.

SECTION IX. Synchronization of SAm®/SAL® and FIBERworks® (Wiring Diagrams)

PG2000 Synchronization Procedures with SAm/SAL light

Synchronization Procedure