Pentair DORADO - Illustrated Parts List

DORADO™ Automatic Pool Cleaner Installation and User’s Guide
13
Illustrated Parts List
2
2A
1
4
1
4
Optional Accessories
Vacpole
(•) - Note Shown
(*) - Includes Item Nos. 6, 11A, 13, 15, 16, two idler gears and 2-arm cam
(##) - Not available separately
Item
No.
Description Part No.
1 Swivel Assembly GW9012
2 Bumper 360152
2A
Bumper Insert Kit (Incl. 2 Bumper Inserts
and 4 Bumper Insert Screws)
360154
3
Screw Kit (6 short, 2 long) GW9504
4 Shroud 360153
5 Brush Ring GW9505
6 Oscillator Chamber Cap GW9506
7 Cam Kit (2 & 3 Leg Cams) GW9507
8
Idler Gear Kit (Incl. 3 Gears) GW9509
9 Block Kit (Incl. 2 Blocks) GW9512
10 Long Gear Shaft (Stainless Steel) GW9513
11 Set Screw #4 Self Tapping##
11A Shaft Kit, Stainless Steel (Incl. Set Screw) GW9536
12 Lower Body* GW9535
13 Lift Brush GW9517
14 Vacuum Skirt GW9508
15 Lift Brush Spring GW9522
16 Ratchet Tab (Stainless Steel) GW9523
17 Oscillator Seal Kit (Incl. 2 Seals) GW9004
18
Oscillator Assembly Kit (Incl. Key #17)
(Ratchet Assembly not sold separately)
GW9503
19 Center Brush Kit (Set of 2) GW9013
• Hose Kit, 12 sections, each 4 ft in length 41200-0131
• Vacuum Regulator 41200-0200
• Vacuum Regulator Cap 41200-0211
• Reducer Cone GW9015
• Unidapt Handle GW9019
• Vac Port Fitting GW9530
• Flow gauge 41200-0210