Need help?Do you have a question about the Pentair EC-011533 and is the answer not in the manual?
Covers critical precautions like electrical shock, submersible use, and code compliance.
Warns about dangers of main drains and suction outlets, lack of SVRS protection.
Details requirements for anti-entrapment covers, spacing, and regular inspection.
Warns about danger from pressurized air during startup and servicing.
Emphasizes that all work must be done by a qualified professional following codes.
Covers voltage, wire gauge, connection tightness, and lid reinstallation.
Details proper motor grounding, GFCI protection, and bonding requirements.
Step-by-step instructions for setting custom speed, time, and duration.
Explains the priming mode, necessary steps before starting, and adjustments.
Lists necessary tools and provides detailed steps for pump disassembly.
Detailed guide on replacing the shaft seal, including handling precautions.
A table listing common problems, causes, and corrective actions.
Explains various fault codes displayed by the drive and their meanings.
Covers critical precautions like electrical shock, submersible use, and code compliance.
Warns about dangers of main drains and suction outlets, lack of SVRS protection.
Details requirements for anti-entrapment covers, spacing, and regular inspection.
Warns about danger from pressurized air during startup and servicing.
Emphasizes that all work must be done by a qualified professional following codes.
Covers voltage, wire gauge, connection tightness, and lid reinstallation.
Details proper motor grounding, GFCI protection, and bonding requirements.
Step-by-step instructions for setting custom speed, time, and duration.
Explains the priming mode, necessary steps before starting, and adjustments.
Lists necessary tools and provides detailed steps for pump disassembly.
Detailed guide on replacing the shaft seal, including handling precautions.
A table listing common problems, causes, and corrective actions.
Explains various fault codes displayed by the drive and their meanings.
The Pentair WhisperFlo® VS and WhisperFlo® VST Variable Speed Pumps are designed for in-ground pools, spas, water features, and fountains. These pumps feature a thick-walled body, a permanent magnet motor, and engineered hydraulics, ensuring a rugged and durable design. Pentair's hydraulic engineering, refined over 40 years, contributes to the compact, rugged, and easy-to-maintain nature of these pumps, promising years of reliable service.
The WhisperFlo® VS and VST pumps are variable speed pumps, meaning they can operate at different speeds to optimize performance and energy consumption. The pump's drive controls both speed settings and run durations. It can operate at speeds ranging from 450 to 3450 RPM and within a voltage range of 115-230 Vrms nominal at either 50 or 60Hz input frequency. The primary goal is to run the pump at the lowest speeds necessary to maintain a sanitary environment while minimizing energy consumption. Optimal programming may require some trial-and-error, considering factors such as pool size, additional water features, types of chemicals used, and local environmental conditions.
The pump can be controlled in several ways:
The WhisperFlo® VS and VST pumps offer several features designed for ease of use and efficient operation:
The pump's keypad features several buttons and LEDs:
Regular maintenance is crucial for the longevity and efficient operation of the WhisperFlo® VS and VST pumps.
The pump's design and features aim to provide a reliable, energy-efficient, and user-friendly experience for pool owners, with clear guidelines for installation, operation, and maintenance.
General| Brand | Pentair |
|---|---|
| Model | EC-011533 |
| Category | Water Pump |
| Language | English |
To Next Page