To Next PageTo Next Page
Need help?Do you have a question about the Pentair JUNG PUMPEN EASYLOGO 2-00 E and is the answer not in the manual?
General| Brand | Pentair |
|---|---|
| Model | JUNG PUMPEN EASYLOGO 2-00 E |
| Category | Water Pump |
| Language | English |
Describes the product's sole purpose for switching submersible pumps based on level.
Lists components included in the product's supply package.
Details required qualifications and responsibilities for personnel handling the appliance.
Outlines rules regarding product modifications, spare parts, and accessories.
Emphasizes compliance with manual instructions, PPE, and safe handling of fluids.
Describes optional features like a potential-free changeover contact and a backup battery.
Instructs to plug the control unit into a properly installed socket.
Discusses EMC compliance and potential interference issues in industrial settings.
Provides guidance on protecting the control unit from weather and storing it in a dry place.
Explains the factory-installed high water level sensor and its function.
Warns about disconnecting power and the need for qualified personnel for electrical work.
Details the installation and usage of the rechargeable battery accessory for alarm functions.
Explains how to connect external signal transmitters via the potential-free changeover contact.
Instructs on how to deactivate the internal alarm buzzer by removing a jumper.
Describes the automatic alternating operation of pumps based on wastewater level.
Explains that both pumps operate during a high water alarm event.
Details operation using only one pump in emergency situations, with fault indication.
Explains how to mute the high water alarm buzzer by pressing the acknowledge button.
Details how to check and test the rechargeable battery for the mains-independent alarm.
Explains the "Fault" indicator and its common causes and actions.
Explains the "High water" indicator and its causes, such as inflow or mains failure.
