21
GB
CORRESPONDING TO THE PRESSURE VALUE THAT THE GROUP WILL MAINTAIN IN THE DELIVERY COLLECTOR
CORRESPONDING TO THE PRESSURE VALUE OF THE LAST PUMP NORMALLY IS SET TO A VALUE OF 0.5 BAR AT THE SET
POINT PRESSURE
By using the combination of keys
By using the combination of keys
set the pressure parameter at the value desired.
set the pressure parameter at the value desired.
At the end of the operation the following message will be displayed:
At the end of the operation the following message will be displayed:
ENTE R
ENTE R
To exit from the programming mode press several times key (19)
By pressing key (17) the unit will begin to function in AUTOMATIC
M
A
STOP THRESHOLD
Bar 05.0
PROGR. MENU
TEMP. KICK STOP
To Next Page
Loading...
