Need help?Do you have a question about the Pentair NOCCHI FCD20 PVM 5-5 F and is the answer not in the manual?
General| Model | NOCCHI FCD20 PVM 5-5 F |
|---|---|
| Category | Water Pump |
| Type | Centrifugal Pump |
| Maximum flow rate | 20 m³/h |
| Max Flow Rate | 20 m³/h |
Ensures motor pumps are protected against dry running by connecting level control devices.
Steps for checking and correcting the direction of pump rotation, especially with inverter drive.
Accessing the machine configuration and authorization for the calibration menu.
Accessing the menu for regulating working and calibration parameters.
Configuring transducer max value and controlling access to menus 8-10.
Configuring set points, stop thresholds, and pump stopping delays.
Setting specific startup and stop pressure values for individual pumps.
Configuring pump cyclic inversion logic and external control options.
Indicates lack of water or low feed pressure, triggering a stop condition.
Signals an inverter blockage; suggests reset procedures for accidental causes.
Indicates a temperature issue for pumps 3 and 4, showing the pressure value.
Operating pumps via SFC card based on pressure levels, excluding inverter.
Operating pumps using selectors, excluding inverter and SFC keyboard.
Important notes regarding product use, checks before contacting service, and required documentation.
To Next Page