Pentax A3000 User Manual

5.
Close the back cover,
making sure that
it
snaps
firmly
into
place.
As
you
depress the shutter button,
the camera
will
automatically
continue
releasing the
shutter
and advancing
the
f ilm until
"1 "
appears on
the
frame counter.
Whilst this
istaking
place,
the film advance
lamp is
on.
(ln
whatever
position
the
mode
selector
is, the shutter
in
this case
will be
released at
1/1OOO
sec.,
making blank exposures until
"1"
appears
on
the
frame counter.)
6. lf the
rewind knob turns
in the direction
of
the arrow
while
the
film is being transported.
it indicates
that the
film
is
advancing
properly.
7.
When
the
frame counter
is
set
to
"1
,"
You
are now
ready to
start
shooting.
The film-loaded indicator
on the back
cover
helps
you
check
if
the
film is loaded or
not.
o12
www.orphancameras.com

Pentax A3000 Specifications

General

Image Sensor	CCD
Image Stabilization	Digital
Shutter Speed	1/2000 - 4 sec
Built-in Flash	Yes
Sensor Size	1/2.3 inch
LCD Screen Resolution	230, 000 dots
Type	Compact
Storage Media	SD/SDHC