To Next PageTo Next PageHow to enable automatic film rewind on my Pentax *ist Digital Camera?
If the film in your Pentax Digital Camera does not rewind automatically when finished, and the custom function [CF10] is set to [2], set the custom function [CF10] to [1] for automatic rewind.
What to do if the shutter doesn't release on my Pentax *ist and nothing is displayed on the LCD panel?
If the shutter on your Pentax Digital Camera doesn't release and nothing shows on the LCD panel, here are a few things to check: * Ensure the lens aperture ring is set to the correct position. * Make sure the main switch is turned ON. * If the low battery warning is blinking, replace the battery. * Verify the batteries are installed correctly. * If and film speed are displayed, set the exposure mode to something other than ISO. * If the built-in flash is charging, wait for it to fully charge.
General| Camera Type | Digital SLR |
|---|---|
| ISO Range | 200-3200 |
| Battery Type | 4x AA batteries |
| Focus Points | 11 |
| Resolution | 6.1 MP |
| Shutter Speed | 30-1/4000 sec + Bulb |
| Viewfinder Type | Optical (pentaprism) |
| Storage Media | SD card |
Advice on avoiding damage and ensuring proper operation during photography.
Choosing between single shot, continuous, timer, and remote modes.
Utilizing predefined scene modes for specific photographic situations.
Exploring manual and semi-automatic exposure control options.
Performing long exposures with the shutter remaining open.
Adjusting exposure levels for brighter or darker results.
Freezing exposure settings for recomposing shots.
Changing how the camera measures light for exposure.
Comprehensive information on the camera's integrated flash features.
Connecting and utilizing external flash units for advanced lighting.
Configuring personalized camera settings through custom function menus.
Solutions for common camera problems and error messages.
