108
Daylight-Sync Shooting
In daylight conditions, when a portrait picture is taken with a
person's face cast in shadow, discharging the flash will
eliminate the shadow.
1.Press the flash pop-up button ( ).
2.Confirm that the flash mode is set to Flash ON.
3.Confirm either the built-in or the external flash is fully
charged.
If the background is too bright, it may be over exposed.
4.Take a picture.
✍
MEMO
• When taking a daylight-sync photograph with displayed on the
LCD panel, the flash may not discharge.
• Set the flash mode to Flash ON to discharge flash in daylight.
Using other types of flash
Use of non-Pentax flash units may damage the camera. For the
best results, use a Pentax dedicated flash unit.
Without Daylight-Sync
With Daylight-Sync
POP UP THE BUILT-IN FLASH MANUALLY
To Next Page
Loading...
Need help?
General
