104
✍
MEMO
• The auto pop-up flash mode can only be set in the auto picture mode
and the picture mode. See page 66.
• The built-in flash pops up automatically when is displayed on the
LCD panel. However, it discharges only when required. (Automatic flash
function)
• The auto pop-up function of the built-in flash does not work when the
AE lock function is in use.
• The automatic flash function can also be used with the external flash.
• Even if is displayed on the LCD panel, the built-in flash does not
pop up automatically when the external flash has been mounted.
• When the built-in flash is popped up and auto pop-up is canceled, the
flash discharges even when not required.
• The built-in flash will not discharge when Flash OFF is set.
USING THE BUILT-IN FLASH
Selecting the Various Built-in Flash Modes
1 At each press of the flash
mode button, the flash mode
on the LCD panel changes
as shown in the chart.
To Next Page
Loading...
Need help?
General
