Pentax *ist User Manual

102
USING THE BUILT-IN FLASH
1 Press the flash mode button
until appears on the LCD
panel.
2 Press the shutter release
button halfway down,
and the built-in flash
automatically pops up when
the flash is required.
3 When the flash is ready to
discharge, the appears in
the viewfinder and on the
LCD panel.
Auto Pop-up Flash Function
In this mode, the built-in flash pops up and discharges
automatically in low light and backlight condition.

Pentax *ist Specifications

General

Camera Type	Digital SLR
ISO Range	200-3200
Battery Type	4x AA batteries
Focus Points	11
Resolution	6.1 MP
Shutter Speed	30-1/4000 sec + Bulb
Viewfinder Type	Optical (pentaprism)
Storage Media	SD card