Pentax *ist User Manual

24
LOADING THE BATTERIES
✍
MEMO
• Be sure to use two lithium CR2 batteries.
• The camera and date imprinting will not operate without batteries.
• The optional "Battery Grip BG-20" is also available for this camera to
use four alkaline batteries.
• Replace the two batteries at the same time. Do not mix battery type,
brands or an old battery with a new one.
• Keep spare batteries on hand for replacement convenience when
shooting outdoors or while traveling.
Default settings after replacing the batteries
• When the batteries are replaced, the date mode will be re-set and the
following camera settings will take effect.
All other settings will remain unchanged.
Drive mode
Wireless flash sync Off
High speed sync flash Off
Audible PCV signal On
Time 0:00
Imprinted date/time Off
Single-frame
Built-in flash
Off
Auto pop-up flash
Red-eye reduction flash

Pentax *ist Specifications

General

Camera Type	Digital SLR
ISO Range	200-3200
Battery Type	4x AA batteries
Focus Points	11
Resolution	6.1 MP
Shutter Speed	30-1/4000 sec + Bulb
Viewfinder Type	Optical (pentaprism)
Storage Media	SD card