Pentax DA - Mounting and Removing the Lens; How to Mount the Lens; How to Remove the Lens

MOUNTING AND REMOVING THE LENS
6
1. To mount the lens on the camera body
Align the red dots on the lens and camera body, and then turn the lens clockwise until it
clicks into place.
Push the tabs in the directions shown by the arrows to remove the lens cap.
✍ Memo :
• Do not hold down the lens unlock button while mounting the lens, otherwise the lens will
not be properly mounted.
• After mounting the lens, gently turn the lens counterclockwise to make sure it is locked in
place.
2. To remove the lens
Hold down the lens unlock button on the camera body and turn the lens counterclock-
wise.
1 2
DAE_BodyA 12/2/03 3:44 PM Page 6