16
1
In picture-taking mode, press the 3 button. Press
23 to scroll through the list.
2
Highlight EYE-FI, then press the 4 button.
3
Choose Selective Share (recommended).
4
When you’re in range of your known Wi-Fi network, turn
on the camera to transfer pictures to your computer or
mobile device.
• It’s critical that you disable (do not turn on) Endless Memory
Mode in EYE-FI Center Software.
• EYE-FI Cards are certified for use in the countries and regions in
which they were purchased.
• The EYE-FI Card has a wireless LAN function. Do not insert the EYE-
FI Card where Wi-Fi is prohibited, such as while aboard an airplane or
in a hospital.
• Even when you set EYE-FI to off, the card may transmit radio waves.
• The card may become warm during use. This is normal.
• Battery life is reduced when using an EYE-FI Card.
• For the best reception when transferring pictures to a computer or
mobile device, the rear (display side) of the camera should face the
Wi-Fi access point.
EYE-FI status icons
• The camera must be turned on to transfer and share pictures.
• Do not turn off the camera while the EYE-FI Card is transferring
pictures.
Icon Meaning
EYE-FI is idle, set to On, and not currently transferring.
EYE-FI is on the network and transferring pictures.
Error
EYE-FI is off.
Changing EYE-Fi Settings
Other EYE-FI Information
To Next Page
Loading...
