8
Chapter 3. Taking pictures and videos
When you turn on the camera for the first time, it’s ready to take pictures
in Smart Capture mode . (After that, it remembers the last mode you
used.)
1
Use the display to compose the picture.
2
Press the Shutter button halfway down to focus and
set exposure.
Focus brackets indicate the camera focus area. If the camera is not
focusing on the desired subject, release the Shutter button and
recompose the scene.
3
Press the Shutter button completely down.
The new picture is briefly displayed and is saved unless you press the
Delete button i. (To dismiss the picture quickly and get back to taking
pictures right away, press the Shutter button halfway down.)
Taking pictures in Smart Capture mode
Focus brackets
Smart Capture
mode
To Next Page
Loading...
Need help?
General
