Need help?Do you have a question about the Pentax EPK-i7010 and is the answer not in the manual?
General| Brand | Pentax |
|---|---|
| Model | EPK-i7010 |
| Category | Media Converter |
| Language | English |
Describes the components and technologies of the EPK-i7010, including i-Scan and OE.
Specifies that equipment use requires supervision by a trained physician.
Covers environmental and safety requirements for equipment installation.
Essential checks before operating the processor.
Safety measures during operation.
Identifies and describes the key parts of the main video processor unit.
Illustrates typical system setups for using the video processor.
Explains how to connect video output devices like monitors and recorders.
Details the procedure for checking power status and lamp illumination.
Verifying the image displayed on the monitor.
Testing the endoscope's automatic brightness adjustment.
Explains how to inspect exposure control and measurement modes.
Details the steps for adjusting white and color balance.
Outlines how to test the suction function using sterile water.
Describes how to check the air and water supply functions.
Explains the procedure for powering the processor on and off.
Describes the different display modes shown on the monitor.
Provides a detailed explanation of operating the touch panel interface.
Explains how to use the Lamp button on the touch panel.
Details how to adjust image brightness using dedicated buttons.
Describes the function and operation of the Pump button.
Explains how to adjust the air and water pump strength.
Guides on adjusting the white balance for accurate color reproduction.
Explains the XLUM function for maximizing light intensity.
Describes how to assign functions to the customizable buttons.
Explains how to access the system setup menu.
Details the configurable settings for OE modes.
Explains how to activate OE modes during i-scan or white light observations.
Describes how to configure edge enhancement levels.
Details the settings available within the i-scan tab of the setup menu.
Details how to set the level for image enhancement and structure display.
Assigning functions to the customize buttons.
Setting date and time.
Selecting save destination.
To Next Page
