Pentax IQZoom - Page 15

When shooting, be sure to turn the main switch on.
1. Compose the picture by sliding the zoom lever,
and bring the autofocus spot 0 on the main part
of your subject.
• Be careful not to block the autofocus windows,
lens, light-sensor window, and flash head with
your fingers, hair, etc. while you are shooting.
2. When the green lamp next to the viewfinder
eyepiece lights up with a slight pressure on the
shutter button, you are ready to take a picture.
If the green lamp flickers, it warns that the
camera-to-subject distance is too short. Make
the distance a little longer.
• When the red lamp lights up, the camera is
automatically switched to flash photography.
3. A s you depress the shutter button further, the
shutter will be released, and the film will be
automatically advanced to the next frame.
• When you change the subject to shoot, release
your finger from the shutter button, and redepress
the shutter button.
11