Pentax IQZoom - Battery Insertion and Check

BATTERY INSERTION AND CHECK
This camera is powered by one 6V lithium battery
pack (Panasonic/Natlonal BR-P2, CR-P2p or Duracell
DL-223A), or four ''AAA"-size alkaline batteries.
• Manganese batteries can also be used, but they
have far less power than the lithium or alkaline
batteries.
1. Open the battery-chamber cover by pushing and
raising it in the direction of the arrow. To insert
the lithium battery, open the inside cover as well.
2. Insert the lithium battery pack into the chamber
correctly as indicated on the inside cover, and
close the two covers.
3. When using alkaline batteries, first fold down
the alkaline battery guide plate and insert the
batteries through the guide's holes making sure
the (+) and (—) sides are correctly placed as
indicated on the guide plate. Do not remove
the plastic tabs/ears in each battery guide hole
as they keep the batteries securely in place.
2